The

Maintenance

The

Maintenance

Complete guide on how to properly
wash your vehicle.

Complete guide on how to properly
wash your vehicle.

However, you can also just let us to take care of this:

However, you can also just let us to take care of this:

How to wash your car

The Gtechniq way.

How to wash your car

The Gtechniq way.

  • Step 1

    If your rims and wheel arches are very dirty and, or caked with brake dust, spray Iron And Fallout Remover onto your car’s wheels and a neat solution of Citrus All Purpose Cleaner into your wheel arches.

    Step 2

    Leave the Iron and Fallout Remover and Citrus All Purpose Cleaner to dwell for three to five minutes. During this time any ferrous particles will dissolve into the Iron And Fallout Remover solution turning it bright purple.

    Step 3

    Hose or jet wash your wheels and wheel arch liners to remove as much loose dirt as possible. If your rims and arches are still coated with dirt and, or brake dust, reapply the Iron and Fallout Remover and Citrus All Purpose Cleaner and agitate the dirty areas with the appropriate brushes. Namely a soft detail brush for wheel nuts, a soft wheel brush for rims and a long handled wheel arch brush for your wheel arches. And then rinse with a hose or jet wash.

    Step 4

    Fill one bucket of water with Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent larger dirt particles mixing in the water. Dunk the WM2 Microfibre Wash Mitt into the suds, wash a wheel and arch at a time. Rinse the wash mitt in the clean water bucket to release the dirt, before dipping it into the soapy bucket again and starting the next wheel and arch.

    Note: Throughout the wash process, make sure you use plenty of soap suds on your mitt and rinse it thoroughly. Keep an eye on the water becoming too dirty, and replace both buckets as and when necessary.

    Step 5

    Apply a thick layer of Citrus Foam all over your cool, dry car using a foam lance. If you do not have a foam lance then dilute Citrus All Purpose Cleaner as much as 1:5, depending on how dirty your car is.

    Step 6

    Once applied leave the Citrus All Purpose Cleaner to dwell on the car for up to five minutes and rinse the foam from the car at a relatively high pressure.

    Step 7

    If the lower sides are still dirty after they have been snow foamed, spray the area with Citrus All Purpose Cleaner instead, leave to dwell for three to five minutes, and rinse with clean water.

    Step 8

    If the leading edges of your vehicle are peppered with bugs, spray Bug Remover onto the contaminated areas, leave to dwell for three to five minutes and rinse away with water.

    Note: Citrus Foam, Citrus All Purpose Cleaner and Bug Remover can be used as many times as required prior to washing. In extreme cases you may want to use a MF1 ZeroR Microfibre Buff Cloth to agitate the surface.

    Step 9

    If you have not done Steps 5 through to 8, hose or jet wash your car to remove any loose dirt. Next, fill one bucket of water with a fresh Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent large dirt particles mixing in the water. Dunk a fresh WM2 Microfibre Wash Mitt into the shampoo, gently wash a panel and then rinse it in the clean water. Repeat as you go around the car.

    Note: Always begin washing the paintwork on the upper surfaces – roof, bonnet and boot, and work your way down. Wash following the linesof the car, using a back and forth, or side to side motion. Circular motions when washing will pronounce any swirl marks.

    Step 10

    If you have not done Steps 5 through to 8, hose or jet wash your car to remove any loose dirt. Next, fill one bucket of water with a fresh Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent large dirt particles mixing in the water. Dunk a fresh WM2 Microfibre Wash Mitt into the shampoo, gently wash a panel and then rinse it in the clean water. Repeat as you go around the car.

    Step 11

    Rinse your car well all over with fresh water from an open ended hose or jet wash to remove all soap residues.

    Step 12

    Dry all of the exterior surfaces of your car with an MF2 Zero Scratch Microfibre Drying Towel, or a MF4 Diamond Sandwich Drying Towel. Simply lay the drying towel across the surface and pull it towards you. Do not leave your car to dry naturally as this will leave water spots.

    Note: Never use a real leather chamois for drying as they are too harsh for modern paints and can scratch the surface.

    Step 13

    Clean all of the exterior glass with Perfect Glass for a streak-free finish.

    Step 14

    Use Gtechniq Quick Detailer on your paintwork with a MF1 ZeroR Microfibre Buff Cloth for a streak and spot-free finish.

    Step 15

    Use Gtechniq Quick Detailer on your paintwork with a MF1 ZeroR Microfibre Buff Cloth for a streak and spot-free finish.

    And you’re done!

  • Step 1

    Hose or jet wash your wheels and wheel arch liners to remove as much loose dirt as possible.

    Step 2

    Fill one bucket of water with Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent larger dirt particles mixing in the water. Dunk the WM2 Microfibre Wash Mitt into the suds, wash a wheel and arch at a time. Rinse the wash mitt in the clean water bucket to release the dirt before dipping it into the soapy bucket again, and starting the next wheel and arch.

    Step 3

    Apply a thick layer of Citrus Foam all over your cool, dry car using a foam lance. If you do not have a foam lance then dilute Citrus All Purpose Cleaner as much as 1:5, depending on how dirty your car is.

    Step 4

    Once applied leave the Citrus Foam or Citrus All Purpose Cleaner to dwell on the car for up to five minutes and rinse the foam from the car at a relatively high pressure.

    Step 5

    Next, fill one bucket of water with a fresh Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent large dirt particles mixing in the water. Dunk a fresh WM2 Microfibre Wash Mitt into the shampoo, gently wash a panel, and then rinse it in the clean water. Repeat as you go around the car.

    Note: Always begin washing the paintwork on the upper surfaces – roof, bonnet and boot, and work your way down. Wash following the lines of the car, using a back and forth, or side to side motion. Circular motions when washing will pronounce any swirl marks.

    Step 6

    Dry all of the exterior surfaces of your car with an MF2 Zero Scratch Microfibre Drying Towel, or a MF4 Diamond Sandwich Drying Towel. Simply lay the drying towel across the surface and pull it towards you. Do not leave your car to dry naturally as this will leave water spots.

    Note: Never use a real leather chamois for drying as they are to harsh for modern paints and can scratch the surface.

    Step 7

    (𝗢𝗽𝘁𝗶𝗼𝗻𝗮𝗹) In our opinion, nothing sets a car of better than dressed tyres, sparkling clear glass and every last trace of water removed from its finish. To achieve this go over your paintwork with Quick Detailer and an MF1 ZeroR Microfibre Buff Cloth, clean the glass with Perfect Glass and a MF5 Power Glass Cloth, and dress the tyres with Durable Tyre Gel using an AP3 Dual Layered Soft Foam Applicator.

    Step 8

    (𝗢𝗯𝗹𝗶𝗴𝗮𝘁𝗼𝗿𝘆) Give yourself a pat on the back for a job well done and smile through gritted teeth when your annoying neighbour says “you can wash mine now”

  • Step 1

    If your rims and wheel arches are very dirty and, or caked with brake dust, spray Iron And Fallout Remover onto your car’s wheels and a neat solution of Citrus All Purpose Cleaner into your wheel arches.

    Step 2

    Leave the Iron and Fallout Remover and Citrus All Purpose Cleaner to dwell for three to five minutes. During this time any ferrous particles will dissolve into the Iron And Fallout Remover solution turning it bright purple.

    Step 3

    Hose or jet wash your wheels and wheel arch liners to remove as much loose dirt as possible. If your rims and arches are still coated with dirt and, or brake dust, reapply the Iron and Fallout Remover and Citrus All Purpose Cleaner and agitate the dirty areas with the appropriate brushes. Namely a soft detail brush for wheel nuts, a soft wheel brush for rims and a long handled wheel arch brush for your wheel arches. And then rinse with a hose or jet wash.

    Step 4

    Fill one bucket of water with Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent larger dirt particles mixing in the water. Dunk the WM2 Microfibre Wash Mitt into the suds, wash a wheel and arch at a time. Rinse the wash mitt in the clean water bucket to release the dirt, before dipping it into the soapy bucket again and starting the next wheel and arch.

    Note: Throughout the wash process, make sure you use plenty of soap suds on your mitt and rinse it thoroughly. Keep an eye on the water becoming too dirty, and replace both buckets as and when necessary.

    Step 5

    Apply a thick layer of Citrus Foam all over your cool, dry car using a foam lance. If you do not have a foam lance then dilute Citrus All Purpose Cleaner as much as 1:5, depending on how dirty your car is.

    Step 6

    Once applied leave the Citrus All Purpose Cleaner to dwell on the car for up to five minutes and rinse the foam from the car at a relatively high pressure.

    Step 7

    If the lower sides are still dirty after they have been snow foamed, spray the area with Citrus All Purpose Cleaner instead, leave to dwell for three to five minutes, and rinse with clean water.

    Step 8

    If the leading edges of your vehicle are peppered with bugs, spray Bug Remover onto the contaminated areas, leave to dwell for three to five minutes and rinse away with water.

    Note: Citrus Foam, Citrus All Purpose Cleaner and Bug Remover can be used as many times as required prior to washing. In extreme cases you may want to use a MF1 ZeroR Microfibre Buff Cloth to agitate the surface.

    Step 9

    If you have not done Steps 5 through to 8, hose or jet wash your car to remove any loose dirt. Next, fill one bucket of water with a fresh Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent large dirt particles mixing in the water. Dunk a fresh WM2 Microfibre Wash Mitt into the shampoo, gently wash a panel and then rinse it in the clean water. Repeat as you go around the car.

    Note: Always begin washing the paintwork on the upper surfaces – roof, bonnet and boot, and work your way down. Wash following the linesof the car, using a back and forth, or side to side motion. Circular motions when washing will pronounce any swirl marks.

    Step 10

    If you have not done Steps 5 through to 8, hose or jet wash your car to remove any loose dirt. Next, fill one bucket of water with a fresh Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent large dirt particles mixing in the water. Dunk a fresh WM2 Microfibre Wash Mitt into the shampoo, gently wash a panel and then rinse it in the clean water. Repeat as you go around the car.

    Step 11

    Rinse your car well all over with fresh water from an open ended hose or jet wash to remove all soap residues.

    Step 12

    Dry all of the exterior surfaces of your car with an MF2 Zero Scratch Microfibre Drying Towel, or a MF4 Diamond Sandwich Drying Towel. Simply lay the drying towel across the surface and pull it towards you. Do not leave your car to dry naturally as this will leave water spots.

    Note: Never use a real leather chamois for drying as they are too harsh for modern paints and can scratch the surface.

    Step 13

    Clean all of the exterior glass with Perfect Glass for a streak-free finish.

    Step 14

    Use Gtechniq Quick Detailer on your paintwork with a MF1 ZeroR Microfibre Buff Cloth for a streak and spot-free finish.

    Step 15

    Use Gtechniq Quick Detailer on your paintwork with a MF1 ZeroR Microfibre Buff Cloth for a streak and spot-free finish.

    And you’re done!

  • Step 1

    Hose or jet wash your wheels and wheel arch liners to remove as much loose dirt as possible.

    Step 2

    Fill one bucket of water with Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent larger dirt particles mixing in the water. Dunk the WM2 Microfibre Wash Mitt into the suds, wash a wheel and arch at a time. Rinse the wash mitt in the clean water bucket to release the dirt before dipping it into the soapy bucket again, and starting the next wheel and arch.

    Step 3

    Apply a thick layer of Citrus Foam all over your cool, dry car using a foam lance. If you do not have a foam lance then dilute Citrus All Purpose Cleaner as much as 1:5, depending on how dirty your car is.

    Step 4

    Once applied leave the Citrus Foam or Citrus All Purpose Cleaner to dwell on the car for up to five minutes and rinse the foam from the car at a relatively high pressure.

    Step 5

    Next, fill one bucket of water with a fresh Gwash solution, and another with fresh water – use grit guards in the bottom, if you have them, to prevent large dirt particles mixing in the water. Dunk a fresh WM2 Microfibre Wash Mitt into the shampoo, gently wash a panel, and then rinse it in the clean water. Repeat as you go around the car.

    Note: Always begin washing the paintwork on the upper surfaces – roof, bonnet and boot, and work your way down. Wash following the lines of the car, using a back and forth, or side to side motion. Circular motions when washing will pronounce any swirl marks.

    Step 6

    Dry all of the exterior surfaces of your car with an MF2 Zero Scratch Microfibre Drying Towel, or a MF4 Diamond Sandwich Drying Towel. Simply lay the drying towel across the surface and pull it towards you. Do not leave your car to dry naturally as this will leave water spots.

    Note: Never use a real leather chamois for drying as they are to harsh for modern paints and can scratch the surface.

    Step 7

    (𝗢𝗽𝘁𝗶𝗼𝗻𝗮𝗹) In our opinion, nothing sets a car of better than dressed tyres, sparkling clear glass and every last trace of water removed from its finish. To achieve this go over your paintwork with Quick Detailer and an MF1 ZeroR Microfibre Buff Cloth, clean the glass with Perfect Glass and a MF5 Power Glass Cloth, and dress the tyres with Durable Tyre Gel using an AP3 Dual Layered Soft Foam Applicator.

    Step 8

    (𝗢𝗯𝗹𝗶𝗴𝗮𝘁𝗼𝗿𝘆) Give yourself a pat on the back for a job well done and smile through gritted teeth when your annoying neighbour says “you can wash mine now”

Tip:

Try to wash your car in the shade, this will prevent soap suds from drying prematurely before you have a chance to rinse them off. When this is not possible, soap suds should be rinsed panel by panel. Rinse with an open-ended hose, this allows the water to sheet, making drying an easier task

Tip: Try to wash your car in the shade, this will prevent soap suds from drying prematurely before you have a chance to rinse them off. When this is not possible, soap suds should be rinsed panel by panel. Rinse with an open-ended hose, this allows the water to sheet, making drying an easier task

Maintenance Packages

Choose one of our Custom Packages:

Maintenance Packages

Choose one of our Custom Packages:

  • We tailor our detailing packages to each car for the best use of time and value for money. The 3-6-month maintenance package includes these steps.

    * Before the process begins, the vehicle undergoes an inspection where its condition is documented through photos and videos.

    The wheels are thoroughly cleaned using Iron Fallout Remover, Citrus Cleaner and Gentle Brushes, all of which are acid-free and pH-balanced to ensure maximum effectiveness and safety of the cleaning process.

    Pre-wash vehicle with PH-neutral SNOW FOAM and Bug Remover, allowing it to dwell before rinsing, including tyres, wheels, and arches.

    Exterior hand-washed using PH-neutral shampoo with a grit guard, two/three(wheels), bucket method and a non-scratch wash mitt.

    Vehicle rinsed again to remove shampoo *Pure Final Rinse with a wash system to eliminate water spots

    Blow dry and tap dry with a premium thick micro fibre towel to avoid scratching

    Door shuts and jambs are dried

    Interior vacuumed and dusted glass is cleaned

    Interior trim wiped

    Vehicle paintwork and wheels wiped down with a Panel Wipe to ensure surfaces are clean and degreased. (Coating inspection continues)

    Gtechniq C2 Liquid Crystal applied to maintain and preserve the paintwork and alloy wheels

    Tyre dressing is applied

    Final inspection to meet our high standards


    ‎‎


  • We tailor our detailing packages to each car for the best use of time and value for money. The 12-month maintenance package includes these steps.

    * Before the process begins, the vehicle undergoes an inspection where its condition is documented through photos and videos.

    The wheels are thoroughly cleaned using Iron Fallout Remover, Citrus Cleaner and Gentle Brushes, all of which are acid-free and pH-balanced to ensure maximum effectiveness and safety of the cleaning process.

    Pre-wash vehicle with PH-neutral SNOW FOAM and Bug Remover, allowing it to dwell before rinsing, including tyres, wheels, and arches.

    Further Decontamination continues using Fallout Remover, Tar and Glue Remover, and Bug Remover (during this process, the products are applied left to dwell and rinsed in between as and when needed)

    Exterior hand washed using PH-neutral shampoo with grit guard, two/three(wheels), bucket method and a non-scratch wash mitt.

    Vehicle rinsed again to remove shampoo *Pure Final Rinse with a wash system to eliminate water spots

    Blow dry and tap dry with a premium thick micro fibre towel to avoid scratching

    Door shuts and jambs are further cleaned and dried

    Bonnet and boot opened edges cleaned and dried

    Interior vacuumed and dusted dash detailed glass is cleaned

    Interior trim cleaned and leather/vinyl conditioned

    Vehicle paintwork and wheels wiped down with a Panel Wipe to ensure surfaces are clean and degreased. (Coating inspection continues)

    Gtechniq EXOv5 applied to maintain and preserve the paintwork and alloy wheels

    Tyre dressing is applied

    Final inspection to meet our high standards

  • Honda E / Fiat 500 Electric / Smart EQ Fortwo

    £275*

  • VW ID.3 / Tesla Model 3 / Polestar 2

    £300*

  • Tesla Model S / BMW i5 / Porsche Taycan

    £325*

  • Volvo XC40 / Mercedes EQC / Tesla Model X

    £345*

  • Honda E / Fiat 500 Electric / Smart EQ Fortwo

    £395*

  • VW ID.3 / Tesla Model 3 / Polestar 2

    £425*

  • Tesla Model S / BMW i5 / Porsche Taycan

    £475*

  • Volvo XC40 / Mercedes EQC / Tesla Model X

    £495*

  • We tailor our detailing packages to each car for the best use of time and value for money. The 3-6-month maintenance package includes these steps.

    * Before the process begins, the vehicle undergoes an inspection where its condition is documented through photos and videos.

    The wheels are thoroughly cleaned using Iron Fallout Remover, Citrus Cleaner and Gentle Brushes, all of which are acid-free and pH-balanced to ensure maximum effectiveness and safety of the cleaning process.

    Pre-wash vehicle with PH-neutral SNOW FOAM and Bug Remover, allowing it to dwell before rinsing, including tyres, wheels, and arches.

    Exterior hand-washed using PH-neutral shampoo with a grit guard, two/three(wheels), bucket method and a non-scratch wash mitt.

    Vehicle rinsed again to remove shampoo *Pure Final Rinse with a wash system to eliminate water spots

    Blow dry and tap dry with a premium thick micro fibre towel to avoid scratching

    Door shuts and jambs are dried

    Interior vacuumed and dusted glass is cleaned

    Interior trim wiped

    Vehicle paintwork and wheels wiped down with a Panel Wipe to ensure surfaces are clean and degreased. (Coating inspection continues)

    Gtechniq C2 Liquid Crystal applied to maintain and preserve the paintwork and alloy wheels

    Tyre dressing is applied

    Final inspection to meet our high standards


    ‎‎


  • Honda E / Fiat 500 Electric / Smart EQ Fortwo

    Small Car £275*

    VW ID.3 / Tesla Model 3 / Polestar 2

    Medium Car £300*

    Tesla Model S / BMW i5 / Porsche Taycan

    Large Car £325*

    Volvo XC40 / Mercedes EQC / Tesla Model X

    Extra Large Car £345*

  • We tailor our detailing packages to each car for the best use of time and value for money. The 12-month maintenance package includes these steps.

    * Before the process begins, the vehicle undergoes an inspection where its condition is documented through photos and videos.

    The wheels are thoroughly cleaned using Iron Fallout Remover, Citrus Cleaner and Gentle Brushes, all of which are acid-free and pH-balanced to ensure maximum effectiveness and safety of the cleaning process.

    Pre-wash vehicle with PH-neutral SNOW FOAM and Bug Remover, allowing it to dwell before rinsing, including tyres, wheels, and arches.

    Further Decontamination continues using Fallout Remover, Tar and Glue Remover, and Bug Remover (during this process, the products are applied left to dwell and rinsed in between as and when needed)

    Exterior hand washed using PH-neutral shampoo with grit guard, two/three(wheels), bucket method and a non-scratch wash mitt.

    Vehicle rinsed again to remove shampoo *Pure Final Rinse with a wash system to eliminate water spots

    Blow dry and tap dry with a premium thick micro fibre towel to avoid scratching

    Door shuts and jambs are further cleaned and dried

    Bonnet and boot opened edges cleaned and dried

    Interior vacuumed and dusted dash detailed glass is cleaned

    Interior trim cleaned and leather/vinyl conditioned

    Vehicle paintwork and wheels wiped down with a Panel Wipe to ensure surfaces are clean and degreased. (Coating inspection continues)

    Gtechniq EXOv5 applied to maintain and preserve the paintwork and alloy wheels

    Tyre dressing is applied

    Final inspection to meet our high standards

  • Honda E / Fiat 500 Electric / Smart EQ Fortwo

    Small Car £395*

    VW ID.3 / Tesla Model 3 / Polestar 2

    Medium Car £425*

    Tesla Model S / BMW i5 / Porsche Taycan

    Large Car £475*

    Volvo XC40 / Mercedes EQC / Tesla Model X

    Extra Large Car £495*

*All Prices excluding VAT

*All Prices excluding VAT

          Privacy Preferences

          When you visit our website, it may store information through your browser from specific services, usually in the form of cookies. Here you can change your Privacy preferences. It is worth noting that blocking some types of cookies may impact your experience on our website and the services we are able to offer.

          Click to enable/disable Google Analytics tracking code.
          Click to enable/disable Google Fonts.
          Click to enable/disable Google Maps.
          Click to enable/disable video embeds.
          Our website uses cookies, mainly from 3rd party services. Define your Privacy Preferences and/or agree to our use of cookies.